6000
Add to CartView Cart
The 6S 25V 12A Balanced 18650 Lithium Battery Charger Protection BMS Board is 18.5V - 25V 12A 6 series lithium batteries precision integrated circuit for fast and safe charging.
This is also a Balancing version protection PCB board that supports over charge protection, over discharge protection, and short circuit protection. Support 3.7V 4.2V (full charger) 18650, 26650 polymer lithium batteries.
Lampshift maximum discharge current: 12A
Charging voltage: 25.5V
Charging current: 12A (MAX)
Overcharge detection voltage: 4.28 ± 0.05V
Overcharge protection delay: 0.1S
Overcharge release voltage: 4.08 ± 0.05V
Over discharge detection voltage: 2.55 ± 0.08V
Overdischarge detection delay: 0.1S
The overdischarge release voltage: 2.9 ± 0.1V
Overcurrent detection voltage: 150mV
Overcurrent detection delay: 9MS
Overcurrent protection current: 30 ± 3A
Overcurrent protection release condition: Disconnect the load
Short circuit detection delay: 250uS
Short circuit protection Release condition: disconnect negative open
Main circuit conduction resistance: ≤20mΩ
Working current: ≤30uA
Sleep current (battery over discharge) ≤10uA
Temperature range: -30 / + 80
Short circuit protection: Can be protected. Need to charging for recovery
Charging voltage: 25.5V
Charging current: 12A (MAX)
Overcharge detection voltage: 4.28 ± 0.05V
Overcharge protection delay: 0.1S
Overcharge release voltage: 4.08 ± 0.05V
Over discharge detection voltage: 2.55 ± 0.08V
Overdischarge detection delay: 0.1S
The overdischarge release voltage: 2.9 ± 0.1V
Overcurrent detection voltage: 150mV
Overcurrent detection delay: 9MS
Overcurrent protection current: 30 ± 3A
Overcurrent protection release condition: Disconnect the load
Short circuit detection delay: 250uS
Short circuit protection Release condition: disconnect negative open
Main circuit conduction resistance: ≤20mΩ
Working current: ≤30uA
Sleep current (battery over discharge) ≤10uA
Temperature range: -30 / + 80
Short circuit protection: Can be protected. Need to charging for recovery